iM3 Low speed Handpieces
iM3 dental machines are fitted with the new iM3 Advantage Low speed motor (20,000rpm) and the Advantage 4:1 straight nose gone (SNC) green in colour. The 4:1 SNC reduces the output speed of the HP to 5,000rpm the correct polishing speed. the Low speed handpiece swivels for ease of use.
iM3 R&R oscillating prophy angles are fitted to the SNC.
Advantage LS motor ordering code: L6990
Advantage Low speed motor ergonomically designed by iM3, to be more user friendly. The motor is light weight and shorter than conventional LS motors. The motor is fitted with a superior 5 blade turbine for extra torque and the speed is set at 20,000rpm with no forward / reverse ring - to minimize confusion. the motor requires a 4 hole connector - standard on iM3 dental machines. LS motors with forward / reverse adjustable speed ring are available from iM3 code L6980
Advantage 4:1 straight nose cone (SNC) ordering code L6995
The new advantage 4:1 SNC (Green) is shorter in length and features no chuck ring. The SNC features a smart friction grip holder making fitting an R&R as simple as pushing it on! (pictured below) The overall shorter length and lighter weight means less fatigue and strain on the user. Note: the advantage 4:1 SNC will only fit the advantage LS motor L6990.
The Advantage low speed motor can be used with a number of different low speed attachments including 1:1 straight nose cones for rabbit dentistry and orthapedics using HP burs, reduction contra atachments and latch heads for RA burs and restorations. All Low speed fittings are available from iM3.
iM3 High Speed handpieces
The range of high speed handpieces pictured below have been selected by iM3 as they are easy to use and reliable. All high speed handpieces sold by iM3 use Friction Grip FG burs.
iM3 Push button High Speed handpiece is available with and without fibre optics. the HP operates at speeds up to 400,000rpm and provides a cooling mist to the bur. 4 hole gaskests are fitted to the bottom of the non fibre optic HP and 5 hole gaskets kitted to the Fibre optic handpiece.
To fit a bur simply push the button and insert the bur all the way into the chuck. to remove the bur, repeat the process ensuring you push the bur in before pulling out.
iM3 PB High speed HP ordering Code USA L6841, AUS H2030
iM3 PB fibre optic HP ordering code USAL6831, AUS H2020
Midwest power lever handpiece is available in both fibre optic and non fibre optic versions. The advantage of the lever HP is the bur is removed and inserted by lifting a small leaver at the back of the HP cap. This can be easier to use than the Push button handpiece where the button at the back of the cap is depressed requiring more strength!
Midwest Lever High speed HP code USA L5050, AUS H2010
Midwest Lever Fibre optic High speed HP code L5010
iM3 offers same day servicing on all iM3 Low and High speed handpieces.
4 hole gasket, fitted to the bottom of low speed motors and high speed handpieces without fibre optics. Available from iM3
5 hole gasket, fitted to High speed handpiecs with fibre optic lighting. Available from iM3.
|
iM3 has designed a unique Oil Free portable Dental compressor. The advantage of the oil free is its quiet, easy to clean & easy to maintain. ...
Clear canine and feline dental model set with educational card only US$129.00 SET ...
iM3 is proud to support our local and international veterinary markets ...