What you must consider before your hot tub arrives

Access requirements for our delivery and installation service

Sometimes a lack of planning prior to delivery can create problems when we position the hot tub in your chosen location.  You must compare the dimensions of the spa (and the trolley) to any restrictive points along the delivery route used to bring the spa into your garden. 

Sometimes a fence panel can be removed and the hot tub can be delivered via a neighbours' garden (with their written permission). Alternatively, your local crane company will often be able to lift it into position for a few hundred pounds. We will gladly work with the crane company of your choice to do this, (unless specifically stated otherwise, the cost of a crane is not included in the delivery).

       

For normal deliveries:          (also see Cranes section if this is not possible)

1. The hot tub is delivered on-end using a purpose-made trolley, adding 20cm to the height clearance
2. You must add the width of your spa to the height of the trolley to work out the total height needed
3. The hot tub will generally be around 95cm wide when on the trolley 
4. The total length of the trolley(2.3metres) must be considered for tight corners - it will not bend!
5. If steps are involved please talk to one of our consultans.

The spa is moved on-end rather than flat, so you need to use the height dimension as the width and the width as the height.

 
 You must check for:

A  Lots of steps? Call us.
 
B  Corner clearance

C  Overhead branches

D  Protruding buildings

E  Gates: height & width

F  Overhanging gutters

G  Boxes, steps or vents

Remember to add 20cm to the height of the hot tub when on-end to allow for the trolley's height

We supply 2 strong men:
If any form of lifting is required to go up/down steps or over obstacles, extra helpers must be provided by you to assist

 Ask for our Perfect fit consultation