|
Swim Spas have very specific installation requirements over a normal hot tub due to their immense size and weight.
A Swim Spa full of water will weigh 7 - 10 tonnes, around the same weight as the truck that is used to deliver it!
Foundation: 200mm thick Concrete, with reinforcing mesh, laid onto well compacted hardcore
Positioning: This should be done with a crane. It is sometimes possible to use a hyab or other machine to position your swim spa, if you have plenty of access for large machinery. Please call us to discuss this option
Power Supply: This is normally 40amp unless stated otherwise
Site Access: The Swim Spa is delivered on a flat bed truck. Your crane company will need to ensure that there is sufficient access for their vehicles as well as the delivery vehicle.
Access Panel: This is always at the same end of the swim spa as the seats. The whole end panel of the swim spa should be easily removable for servicing, and 900mm access must be provided on all sides. When decking around the swim spa after installation, care must be taken to ensure that supports do not obstruct access to the removable panels - see the Decking section.
| 
